SPECIFICATIONS:
Wingspan
1665 mm (65.6 in)
Length
1916 mm (75.4 in)
Flying Weight
10.5kg (23.1 lb)with 1800cc Aviation kerosene and 750cc smoke
Turbine Engine
SW80B 8KG brushless / SW60B 6KG brushless (required & not included)
Cruising speed
100～140 km/h
Flying time
6.5 minutes (avg.)
Wing area
54 dm2
Wing load
195 g/dm2
Main material
20 times EPO
Painting surface
matte paint
Suitable experience level
□Zero basis □Beginner □Intermediate ■Advanced
PNP Assembly difficulty
□☆10mins ■★☆30mins □★★60mins
Suitable for ambient temperature
0℃～40℃
Radio System
9 channel (required & not included)
Control System
MFC-2085
Servos
7.4V 25g×2 Metal gear with 80mm lead (left & right ailerons forward) 7.4V 25g×2 Metal gear with 80mm lead (Flap×2 forward) 7.4V 25g×3 Metal gear with 80mm lead (Elevator×2 & Rudder×1 forward) 7.4V 12g×1 Metal gear with 380mm lead with protection function (Nose wheel steering forward) 7.4V 12g×1 Metal gear with 320mm lead with protection function (Front wheel cover plate forward) 7.4V 12g×2 Metal gear with 80mm lead with protection function (Rear wheel cover plate forward) 7.4V 12g×2 Metal gear with 80mm lead with protection function (Retarder plate forward)
Recommended Battery
2S,7.4V,5200mAh×2,LiPo with XT60 type plug(required & not included)
Ailerons
Yes
Flaps
Yes
Elevator(Horizontal tail)
Yes
Rudder(Vertical tail)
Yes
LED lights system
Yes
Electromagnetic brake system
Yes
Retarder plate
Yes
The smoke system
yes
Reinforced gyro
no
Packaging / Size
Packing Box + Outer Box(Card mark)/52.87×20.28×17.72(inch)
CG (Center of Gravity)
120～125mm from the leading edge of the Main Wing
Landing Gears
Metal electric retractable hydraulic landing gear×3
Battery Charger
LiPo battery charger (required & not included)
PACKAGE INCLUDES:
Fuselage×1 pcs
Left main wing×1 pcs
Right main wing×1 pcs
Left Horizontal tail ×1 pcs
Right Horizontal tail×1 pcs
Vertical tail×1 pcs
Nose×1 pcs
Cockpit×1 pcs
Left auxiliary tank×1 pcs
Right auxiliary tank×1 pcs
1# Main wing carbon tube L=598mm external diameter 16mm×1 pcs
2# Main wing carbon tube L=598mm external diameter 10mm×1 pcs
Horizontal Stabilizer carbon tube L=600mm external diameter 6mm×1 pcs
Accessories Bag×1 pcs
Screw (HM3×10mm)×8 pcs (Horizontal tail)
Screw (HA3×10mm)×8 pcs (Vertical tail / Tail nozzle)
Screw (HA3×14mm)×8 pcs (Engine)
Screw (HM4×10mm)×8 pcs (Wing)
Screw (PWM6×70mm)×8 pcs (Nose)
100mm signal line(JR male+JR male)×8 pcs
Pneumatic tube×2 pcs
Cue streamers×1 pcs
Buckle×1 pcs
Anti-corrosion rubber plug×1 pcs
Manual×1 pcs
REQUIRES:
SW80B 8KG brushless / SW60B 6KG brushless (required & not included)
9 channel radio system(radio & receiver) (required & not included)
2S,7.4V,5200mAh×2,LiPo with XT60 type plug (required & not included)
LiPo battery charger (required & not included)
Q: What does KIT mean?
A: It means aircraft comes without any electronic equipment, wiring, plumbing, electronics, or exhaust pipe. The typical wood, plastic, heat shields (where applicable), and applicable hardware is usually included.
Q: What does KIT+L mean?
A: It means a KIT version but comes with landing gear installed.
Q: What does PNP mean?
A: It means the aircraft has equipment already installed and tested, but customers need to purchase remote control, receiver, batteries and the charger they prefer. For example: servos, power distribution system, landing gear, control system for utilities (gear. lights, brakes, and accessories), lights & cables (according to the features of the model aircraft). It's a 90% completed model. *Note: turbine and turbine accessories are not included.
Q: What does PNP+T mean?
A: It means a PNP version, which includes the turbine engine installed and tested. It's a 95% installation.
Q: What does RTF mean?
A: It means the aircraft comes with all equipment necessary and installed. Some of the equipment has options or is optional. This equipment is typically selected and paid for by the customer (some of these selections will include battery supply, remote control, receiver, and gyro). It's a 100% installation.