Skip to product information

HSDJETS HJ-10 Foam Turbine PNP with Vectoring nozzle

$1,669.90 

HSDJETS HJ-10 Foam Turbine Black Colors PNP with Vectoring nozzle 

SPECIFICATIONS:

Wingspan 1300 mm (51.2 in)
Length 2115 mm (83.3 in)
Flying Weight 10.5kg (23.1 lb)with 1800cc Aviation kerosene
Configuration of turbine engine 8KG~12KG (required & not included)
Cruising speed 160~180 km/h
Flying time 4~6 mins (full throttle)
Wing area 64 dm2
Wing load 164.1 g/dm2
Main material 20 times EPO
Painting surface Matte environmental water-borne paint + decal
Suitable experience level Advanced
PNP Assembly difficulty □☆10mins ■★☆30mins □★★60mins
Suitable for ambient temperature 0℃~40℃
Radio System 10 channel (required & not included)
Control System MFC-2085
Servos

7.4V 40g×1 Metal gear with 450mm lead (Canard wing forward)
7.4V 25g×2 Metal gear with 80mm lead (Left & right ailerons forward)
7.4V 25g×2 Metal gear with 80mm lead (Elevator×2 forward)
7.4V 25g×1 Metal gear with 80mm lead (Rudder×1 forward)
7.4V 25g×2 Metal gear with 80mm lead (Vectoring nozzle×2 forward)
7.4V 12g×1 Metal gear with 500mm lead with protection function (Front wheel cover plate forward)
7.4V 12g×3 Metal gear with 500mm lead with protection function (Front wheel steering / Rear wheel cover plate forward)

Recommended Battery 2S,7.4V,3200mAh×2,LiPo with XT60 type plug(required & not included)
Ailerons Yes
Canard wing Yes
Elevator Yes
Rudder(Vertical tail) Yes
The smoke system Yes
LED lights system Yes
Electromagnetic brake system Yes
Vectoring nozzle Yes
Reinforced gyro Selective configuration (not included)
Packaging / Size Packing Box + Outer Box(Card mark)/60×21.3×14.8(inch)
CG (Center of Gravity) 238~242 mm from the leading edge of the Main Wing
Landing Gears Metal electric retractable hydraulic landing gear×3
Battery Charger LiPo battery charger (required & not included)



PACKAGE INCLUDES:

  • Fuselage×1 pcs
  • Left main wing×1 pcs
  • Right main wing×1 pcs
  • Nose×1 pcs
  • Cockpit×1 pcs
  • Vertical tail×1 pcs
  • L&R Canard wing×1 pcs
  • Air inlet×1 pcs
  • Caudal fin×1 pcs
  • 1# Main wing carbon tube L=520mm external diameter 16mm×1 pcs
  • 2# Main wing carbon tube L=540mm external diameter 10mm×1 pcs
  • Accessories Bag 1 ×1 pcs
    • Screw (HA3×10mm)×6 pcs (Horizontal tail)
    • Screw (HM3×65mm)×2 pcs (Wing)
    • Screw (HM4×45mm)×4 pcs (Wing)
    • Screw (HM3×6mm)×4 pcs (Vertical tail / Nose)
  • Accessories Bag 2 ×1 pcs
    • 100mm signal line(JR male+JR male) ×8 pcs
  • Accessories Bag 3 ×1 pcs
    • Filler tube ×1 pcs
    • Left and right pitot tubes ×2 pcs
    • Nose radar antenna ×1 pcs
    • Upper and lower fuselage antenna ×2 pcs
    • Remove the ribbon before flight ×1 pcs
    • Oil tank overflow vent plug ×1 pcs
  • Manual×1 pcs


REQUIRES:

  • 8KG~12KG turbine engine (required & not included)
  • 10 channel radio system(radio & receiver) (required & not included)
  • 2S,7.4V,3200mAh×2,LiPo with XT60 type plug(required & not included)
  • LiPo battery charger (required & not included)