HSDJETS Super Viper Foam Turbine PNP Sport Jet
SPECIFICATIONS:
Wingspan | 1500mm (59.1in) |
Length | 1663mm (65.5in) |
Flying Weight | 6.5kg (14.3 lb) |
Turbine Engine | SW60 6KG brushed / SW60B 6KG brushless (required & not included) |
Cruising speed | 250 km/h |
Flying time | 6 min (avg) |
Wing area | 34.28 dm2 |
Wing load | 189.6 g/dm2 |
Main material | 20 times EPO |
Painting surface | matte paint |
Suitable experience level | Intermediate |
PNP Assembly difficulty | □☆10mins ■★☆30mins □★★60mins |
Suitable for ambient temperature | 0℃~40℃ |
Radio System | 8 channel (required & not included) |
Control System | MFC-2085 |
Servos |
25g×2 Metal gear with 480mm lead (left & right ailerons forward) |
Recommended Battery | 2S,7.4V,1800~2000mAh×2,LiPo with T type plug(required & not included) |
Ailerons | Yes |
Flaps | Yes |
Elevator(Horizontal tail) | Yes |
Rudder(Vertical tail) | Yes |
The smoke system | Yes |
LED lights system | Yes |
Electromagnetic brake system | Yes |
Reinforced gyro | not included |
Packaging / Size | Packing Box + Outer Box(Card mark)/132.5×46×39.5(cm) |
CG (Center of Gravity) | 170mm from the leading edge of the Main Wing |
Landing Gears | Metal electric retractable hydraulic landing gear×3 |
Battery Charger | LiPo battery charger (required & not included) |
PACKAGE INCLUDES:
- Fuselage×1
- Left Wing×1
- Right Wing×1
- Left Horizontal Stabilizer×1
- Right Horizontal Stabilizer×1
- Vertical Stabilizer×1
- Nose×1
- Cockpit canopy×1
- Main wing carbon tube L=598mm external diameter 16mm×1
- Horizontal Stabilizer carbon tube L=500mm external diameter 6mm×1
- Sticker×1
- Capping board×1
- Accessories Bag 1 ×1
- Nylon rocker arm of the servo ×2
- Double sided sponge paper×1
- Screw (HM4×35mm)×4 (Nose)
- Screw (HM3×14mm)×2 (Wing)
- Screw (HM3×10mm)×2 (Wing)
- Screw (PA3×14mm)×4 (Engine)
- Screw (PA3×10mm)×4 (Tail nozzle)
- Screw (PA3×8mm)×8 (Horizontal Stabilizer/Vertical Stabilizer)
- Accessories Bag 2 ×1
- L type 3mm inner six corner board hand×1
- Screw (HM4×35mm)×4 (Nose)
- Screw (HM3×14mm)×2 (Wing)
- Screw (HM3×10mm)×2 (Wing)
- Screw (PA3×14mm)×4 (Engine)
- Screw (PA3×8mm)×8 (Horizontal Stabilizer/Vertical Stabilizer)
- Manual×1
REQUIRES:
- SW60 6KG brushed / SW60B 6KG brushless (required & not included)
- 8 channel radio system(radio & receiver) (required & not included)
- 2S,7.4V,1800~2000mAh×2,LiPo with T type plug (required & not included)
- LiPo battery charger (required & not included)
Q: What does KIT mean?
A: It means aircraft comes without any electronic equipment, wiring, plumbing, electronics, or exhaust pipe. The typical wood, plastic, heat shields (where applicable), and applicable hardware is usually included.
Q: What does KIT+L mean?
A: It means a KIT version but comes with landing gear installed.
Q: What does PNP mean?
A: It means the aircraft has equipment already installed and tested, but customers need to purchase remote control, receiver, batteries and the charger they prefer. For example: servos, power distribution system, landing gear, control system for utilities (gear. lights, brakes, and accessories), lights & cables (according to the features of the model aircraft). It's a 90% completed model. *Note: turbine and turbine accessories are not included.
Q: What does PNP+T mean?
A: It means a PNP version, which includes the turbine engine installed and tested. It's a 95% installation.
Q: What does RTF mean?
A: It means the aircraft comes with all equipment necessary and installed. Some of the equipment has options or is optional. This equipment is typically selected and paid for by the customer (some of these selections will include battery supply, remote control, receiver, and gyro). It's a 100% installation.