Skip to product information


Sorry, this item is out of stock





Wingspan 1720 mm (67.7 in)
Length 1715 mm (67.5 in)
Flying Weight 8 kg (15.4 lb) with 12S / 22.2V / 5200mAh / 45C Li-Po×2 PCS
Flying time 3~5 minutes
Wing area 64.34 dm2
Wing load 124.3 g/dm2
Main material 35 times EPO
Painting surface Matte environmental water-borne paint + decal
Suitable experience level □Zero basis □Beginner ■Intermediate □Advanced
PNP Assembly difficulty □☆10mins ■★☆30mins □★★60mins
Suitable for ambient temperature 0℃~40℃
Radio System 8 channel (required & not included)
Control System MFC-2085
Motor 5268-KV640(Inner rotor)
EDF S-EDF 120mm-10 blade
ESC Hobbywing 160A brushless

25g×2 Metal gear with 560mm lead (Left & Right ailerons forward)
25g×2 Metal gear with 410mm lead (Left & Right flap forward)
25g×3 Metal gear with 190mm lead (Left & Right Elevator / Vertical tail forward)
25g×1 Metal gear with 230mm lead (Front wheel cover plate forward)
7.4V 12g×3 Metal gear with 380mm lead with protection function (Nose wheel steering / Rear wheel cover plate forward)
7.4V 12g×2 Metal gear with 80mm lead with protection function (Retarder plate forward)

Recommended Power Battery 6S,22.2V,5200mAh,45C×2,LiPo with AS150 type plug(required & not included)
Recommended Receiver Battery 2S,7.4V,2200~5200mAh×2,LiPo with XT60 type plug(required & not included)
Ailerons Yes
Flaps Yes
Elevator(Horizontal tail) Yes
Rudder(Vertical tail) Yes
LED lights system Yes
Electromagnetic brake system Yes
Retarder plate Yes
Reinforced gyro Selective configuration (not included)
Packaging / Size Pearl cotton 3D Inner box + Outer Box /1320×550×440(mm)
CG (Center of Gravity) 300~305mm from the leading edge of the Main Wing
Landing Gears All metal hydraulic simulation electric retractable landing gear×3
Battery Charger LiPo battery charger (required & not included)


  • Fuselage×1 pcs
  • Left main wing×1 pcs
  • Right main wing×1 pcs
  • Nose×1 pcs
  • Cockpit×1 pcs
  • Vertical tail×1 pcs
  • Left Auxiliary oil tank×1 pcs
  • Right Auxiliary oil tank×1 pcs
  • Horizontal tail ×1 pcs
  • Main wing bolt rod 1 L=720mm external diameter 20mm×1 pcs
  • Accessories Bag 1 ×1 pcs
    • Screw (HA4×45mm)×4 pcs (Horizontal tail)
    • Screw (HM4×20mm)×4 pcs (Main wing)
    • Screw (HM4×16mm)×4 pcs (Main wing)
    • Screw (HA3×10mm)×16 pcs (Vertical tail)
    • Screw (HM4×60mm)×4 pcs (Nose + Fuselage)
    • Screw (HM4×70mm)×8 pcs (Auxiliary oil tank)
  • Accessories Bag 2 ×1 pcs
    • 100mm signal line(JR male+JR male)×8 pcs
    • Head fixed plastic parts×4 pcs
    • 3mm L-type hexagon wrench×1 pcs
    • 4mm L-type hexagon wrench×1 pcs
    • Wing antenna ×1 pcs
  • HME-262 Manual×1 pcs
  • MFC-2085 Manual×1 pcs


  • 8 channel radio system (radio & receiver) (required & not included)
  • 6S,22.2V,5200mAh,45C×2, LiPo with AS150 type plug (required & not included)2S,7.4V,2200~5200mAh×2, LiPo with XT60 type plug (required & not included) LiPo battery charger (required & not included)

Q: What does KIT mean?
A: It means aircraft comes without any electronic equipment, wiring, plumbing, electronics, or exhaust pipe. The typical wood, plastic, heat shields (where applicable), and applicable hardware is usually included. 

Q: What does KIT+L mean?
A: It means a KIT version but comes with landing gear installed.

Q: What does PNP mean?
A: It means the aircraft has equipment already installed and tested, but customers need to purchase remote control, receiver, batteries and the charger they prefer. For example: servos, power distribution system, landing gear, control system for utilities (gear. lights, brakes, and accessories), lights & cables (according to the features of the model aircraft). It's a 90% completed model. *Note: turbine and turbine accessories are not included.

Q: What does PNP+T mean?
A: It means a PNP version, which includes the turbine engine installed and tested. It's a 95% installation.

Q: What does RTF mean?
A: It means the aircraft comes with all equipment necessary and installed. Some of the equipment has options or is optional. This equipment is typically selected and paid for by the customer (some of these selections will include battery supply, remote control, receiver, and gyro). It's a 100% installation.