HSDJETS HF-86 Foam Turbine PNP
SPECIFICATIONS:
Wingspan
1720 mm (67.7 in)
Length
1715 mm (67.5 in)
Flying Weight
10.5kg (23.1 lb)with 1800cc Aviation kerosene
Configuration of turbine engine
7KG～10KG (required & not included)
Cruising speed
160～180 km/h
Flying time
6～8 mins (full throttle)
Wing area
64.34 dm2
Wing load
163.2 g/dm2
Main material
20 times EPO
Painting surface
Matte environmental water-borne paint + decal
Suitable experience level
□Zero basis □Beginner ■Intermediate □Advanced
PNP Assembly difficulty
□☆10mins ■★☆30mins □★★60mins
Suitable for ambient temperature
0℃～40℃
Radio System
8 channel (required & not included)
Control System
MFC-2085
Servos
7.4V 25g×2 Metal gear with 560mm lead (Left & right ailerons forward) 7.4V 25g×2 Metal gear with 410mm lead (Flap×2 forward) 7.4V 25g×3 Metal gear with 190mm lead (Elevator×2 & rudder×1 forward) 7.4V 25g×1 Metal gear with 230mm lead with protection function (Front wheel cover plate forward) 7.4V 12g×3 Metal gear with 380mm lead with protection function (Front wheel steering / Rear wheel cover plate forward) 7.4V 12g×2 Metal gear with 80mm lead with protection function (Speed brake forward)
Recommended Battery
2S,7.4V,2200～5200mAh×2,LiPo with XT60 type plug(required & not included)
Ailerons
Yes
Flaps
Yes
Elevator(Horizontal tail)
Yes
Rudder(Vertical tail)
Yes
The smoke system
No
LED lights system
Yes
Electromagnetic brake system
Yes
Reinforced gyro
Selective configuration (not included)
Packaging / Size
Packing Box + Outer Box(Card mark)/52×21.7×17.3(inch)
CG (Center of Gravity)
300～305 mm from the leading edge of the Main Wing
Landing Gears
Metal electric retractable hydraulic landing gear×3
Battery Charger
LiPo battery charger (required & not included)
PACKAGE INCLUDES:
Fuselage×1 pcs
Left main wing×1 pcs
Right main wing×1 pcs
Nose×1 pcs
Cockpit×1 pcs
Vertical tail×1 pcs
Horizontal tail ×1 pcs
Left auxiliary tank×1 pcs
Right auxiliary tank×1 pcs
Main wing carbon tube L=598mm external diameter 16mm×1 pcs
Accessories Bag 1 ×1 pcs
Screw (HA4×45mm)×4 pcs (Horizontal tail)
Screw (HM4×20mm)×4 pcs (Wing)
Screw (HM4×16mm)×4 pcs (Wing)
Screw (HA3×10mm)×16 pcs (Vertical tail / Nose)
Screw (HA3×14mm)×8 pcs (Engine)
Screw (HM4×60mm)×4 pcs (Nose)
Screw (HM4×70mm)×8 pcs (Auxiliary tank)
Accessories Bag 2 ×1 pcs
100mm signal line(JR male+JR male) ×8 pcs
Manual×1 pcs
REQUIRES:
8KG～12KG turbine engine (required & not included)
8 channel radio system(radio & receiver) (required & not included)
2S,7.4V,2200～5200mAh×2,LiPo with XT60 type plug(required & not included)
LiPo battery charger (required & not included)