Skip to product information

HSDJETS S-EDF 105mm Super Viper PNP 12S


HSDJETS S-EDF 105mm Super Viper Red Colors PNP 12S


Wingspan 1500mm (59.1in)
Length 1663mm (65.5in)
Flying Weight 5kg (11 lb) with 12S Battery
S-EDF/Motor S-EDF 105mm 4258/700KV brushless
Number of EDF Blade 11 blades
Cruising speed about 180 km/h
Flying time 4.5 min (avg)
Wing area 34.28 dm2
Wing load 145.9 g/dm2
Main material 35 times EPO
Painting surface matte paint
Suitable experience level □Zero basis □Beginner ■Intermediate □Advanced
PNP Assembly difficulty □☆10mins ■★☆30mins □★★60mins
Suitable for ambient temperature 0℃~40℃
Radio System 7 channel (required & not included)
ESC 160A/12S Hobbywing AS150
UBEC 6A (2P Du-Pont and JR connector)
Control System Integrated Mix-Control system

25g×3 Metal gear with 190mm lead (Left & right ailerons & rudder forward)
25g×2 Metal gear with 480mm lead (Flap forward)
25g×2 Metal gear with 80mm lead (Elevator forward)
12g×1 Metal gear with 450mm lead (Nose wheel steering forward)
12g×1 Metal gear with 300mm lead (360°lock Hatch cover forward)

Recommended Receiver Battery 2S,7.4V,1800~2000mAh,LiPo with T type plug(required & not included)
Recommended Power Battery 6S,22.2V,5000~6000mAh×2,LiPo with AS150 type plug(required & not included)
Ailerons Yes
Flaps Yes
Elevator(Horizontal tail) Yes
Rudder(Vertical tail) Yes
General landing gear control system Yes
LED lights system Yes
Electromagnetic brake system Yes
Reinforced gyro not included
Packaging / Size Packing Box + Outer Box(Card mark)/132.5×46×39.5(cm)
CG (Center of Gravity) 6.69in from the leading edge of the Main Wing
Landing Gears Metal electric retractable hydraulic landing gear×3
Battery Charger LiPo battery charger (required & not included)


  • Fuselage×1
  • Left Wing×1
  • Right Wing×1
  • Left Horizontal Stabilizer×1
  • Right Horizontal Stabilizer×1
  • Vertical Stabilizer×1
  • Nose×1
  • Cockpit canopy×1
  • Main wing aluminum tube L=598mm external diameter 16mm×1
  • Horizontal Stabilizer tube L=500mm external diameter 6mm×1
  • Sticker×1
  • Accessories Bag 1 ×1
    • Screw (PWM4×35mm)×4 (Nose)
    • Screw (PM3×14mm)×2 (Wing)
    • Screw (PM3×10mm)×2 (Wing)
    • Screw (PA2×12mm)×4
    • Screw (PA3×8mm)×8 (Horizontal Stabilizer/Vertical Stabilizer)
  • Manual×1

  • 7 channel radio system(radio & receiver) (required & not included)
  • 6S,22.2V,5000~6000 mAh LiPo with AS150 type connector×2(required & not included)
  • 2S,7.4V,1800~2000 mAh LiPo with T type connector×1(required & not included)
  • LiPo battery charger (required & not included)