HSDJETS HJ-10 Foam Turbine KIT

SPECIFICATIONS:



Wingspan
1300 mm (51.2 in)


Length
2115 mm (83.3 in)


Weight
---


Turbine Engine
8KG～12KG (required & not included)


Cruising speed
---


Flying time
---


Wing area
64 dm2


Wing load
---


Main material
20 times EPO


Painting surface
Matte environmental water-borne paint + decal


Suitable experience level
Advanced


KIT Assembly difficulty
□☆10mins □★☆30mins ■★★60mins (For reference only)


Suitable for ambient temperature
0℃～40℃


Radio System
10 channel (required & not included)


Control System
MFC-2085 (required & not included)


Servos(required & not included)

7.4V 40g×1 Metal gear with 450mm lead (Canard wing forward) 7.4V 25g×2 Metal gear with 80mm lead (Left & right ailerons forward) 7.4V 25g×2 Metal gear with 80mm lead (Elevator×2 forward) 7.4V 25g×1 Metal gear with 80mm lead (Rudder×1 forward) 7.4V 25g×2 Metal gear with 80mm lead (Vectoring nozzle×2 forward) 7.4V 12g×1 Metal gear with 500mm lead with protection function (Front wheel cover plate forward) 7.4V 12g×3 Metal gear with 500mm lead with protection function (Front wheel steering / Rear wheel cover plate forward)



Recommended Battery
2S,7.4V,3200mAh×2,LiPo with XT60 type plug(required & not included)


Ailerons
Yes


Canard wing
Yes


Elevator
Yes


Rudder(Vertical tail)
Yes


The smoke system
Selective configuration (not included)


LED lights system
Selective configuration (not included)


Electromagnetic brake system
Selective configuration (not included)


Vectoring nozzle
Selective configuration (not included)


Reinforced gyro
Selective configuration (not included)


Packaging / Size
Packing Box + Outer Box(Card mark)/60×21.3×14.8(inch)


CG (Center of Gravity)
238～242 mm from the leading edge of the Main Wing


Landing Gears
Metal electric retractable hydraulic landing gear×3 (required & not included)


Battery Charger
LiPo battery charger (required & not included)



PACKAGE INCLUDES:

Fuselage×1 pcs
Left main wing×1 pcs
Right main wing×1 pcs
Nose×1 pcs
Cockpit×1 pcs
Vertical tail×1 pcs
L&R Canard wing×1 pcs
Air inlet×1 pcs
Caudal fin×1 pcs
1# Main wing carbon tube L=520mm external diameter 16mm×1 pcs
2# Main wing carbon tube L=540mm external diameter 10mm×1 pcs
Accessories Bag 1 ×1 pcs

Screw (HA3×10mm)×6 pcs (Horizontal tail)
Screw (HM3×65mm)×2 pcs (Wing)
Screw (HM4×45mm)×4 pcs (Wing)
Screw (HM3×6mm)×4 pcs (Vertical tail / Nose)


Accessories Bag 2 ×1 pcs

100mm signal line(JR male+JR male) ×8 pcs


Accessories Bag 3 ×1 pcs

Filler tube ×1 pcs
Left and right pitot tubes ×2 pcs
Nose radar antenna ×1 pcs
Upper and lower fuselage antenna ×2 pcs
Remove the ribbon before flight ×1 pcs
Oil tank overflow vent plug ×1 pcs


Manual×1 pcs

REQUIRES:

8KG～12KG turbine engine (required & not included)
10 channel radio system(radio & receiver) (required & not included)
2S,7.4V,3200mAh×2,LiPo with XT60 type plug(required & not included)
LiPo battery charger (required & not included)
Servos 7.4V 40g×1 Metal gear with 450mm lead (Canard wing forward) 7.4V 25g×2 Metal gear with 80mm lead (Left & right ailerons forward) 7.4V 25g×2 Metal gear with 80mm lead (Elevator×2 forward) 7.4V 25g×1 Metal gear with 80mm lead (Rudder×1 forward) 7.4V 25g×2 Metal gear with 80mm lead (Vectoring nozzle×2 forward) 7.4V 12g×1 Metal gear with 500mm lead with protection function (Front wheel cover plate forward) 7.4V 12g×3 Metal gear with 500mm lead with protection function (Front wheel steering / Rear wheel cover plate forward)
Metal electric retractable hydraulic landing gear×3 (required & not included)