HSD HT-45 by HSDJETS Foam Turbine PNP
HSD HT-45 by HSDJETS Foam Turbine PNP
HSD HT-45 by HSDJETS Foam Turbine PNP
HSD HT-45 by HSDJETS Foam Turbine PNP
HSD HT-45 by HSDJETS Foam Turbine PNP
HSD HT-45 by HSDJETS Foam Turbine PNP
HSD HT-45 by HSDJETS Foam Turbine PNP
HSD HT-45 by HSDJETS Foam Turbine PNP
HSD HT-45 by HSDJETS Foam Turbine PNP
HSD HT-45 by HSDJETS Foam Turbine PNP
HSD HT-45 by HSDJETS Foam Turbine PNP
HSD HT-45 by HSDJETS Foam Turbine PNP
HSD HT-45 by HSDJETS Foam Turbine PNP
HSD HT-45 by HSDJETS Foam Turbine PNP
HSD HT-45 by HSDJETS Foam Turbine PNP
HSD HT-45 by HSDJETS Foam Turbine PNP
HSD HT-45 by HSDJETS Foam Turbine PNP
HSD HT-45 by HSDJETS Foam Turbine PNP
HSD HT-45 by HSDJETS Foam Turbine PNP
HSD HT-45 by HSDJETS Foam Turbine PNP
HSD HT-45 by HSDJETS Foam Turbine PNP
HSD HT-45 by HSDJETS Foam Turbine PNP
HSD HT-45 by HSDJETS Foam Turbine PNP
HSD HT-45 by HSDJETS Foam Turbine PNP
HSD HT-45 by HSDJETS Foam Turbine PNP
HSD HT-45 by HSDJETS Foam Turbine PNP
HSD HT-45 by HSDJETS Foam Turbine PNP
HSD HT-45 by HSDJETS Foam Turbine PNP
HSD HT-45 by HSDJETS Foam Turbine PNP
HSD HT-45 by HSDJETS Foam Turbine PNP
HSD HT-45 by HSDJETS Foam Turbine PNP
HSD HT-45 by HSDJETS Foam Turbine PNP

HSD HT-45 by HSDJETS Foam Turbine PNP

$1,599.90 
← Previous Product Next Product →

HSD HT-45 by HSDJETS Foam Turbine PNP

Flying time 4～6 mins (full throttle)
Wing area 47 dm2
Wing load 195.7 g/dm2
Main material 20 times EPO
Painting surface Matte environmental water-borne paint + decal
Suitable experience level □Zero basis □Beginner □Intermediate ■Advanced
PNP Assembly difficulty □☆10mins ■★☆30mins □★★60mins
Suitable for ambient temperature 0℃～40℃
Radio System 9 channel (required & not included)
Control System MFC-2085
Servos

7.4V 40g×1 Metal gear with 80mm lead (Elevator forward)
7.4V 25g×2 Metal gear with 560mm lead (Left & right ailerons forward)
7.4V 25g×2 Metal gear with 410mm lead (Left & right flaps ×2 forward)
7.4V 25g×1 Metal gear with 80mm lead (Rudder×1 forward)
7.4V 17g×4 Metal gear with 180mm lead (Left & right Leading edge flap×4 forward)
7.4V 12g×2 Metal gear with 80mm lead with protection function (Left & right Speed brake ×2 forward)
7.4V 12g×2 Metal gear with 600mm lead with protection function (Front wheel steering / cover plate ×2 forward)
7.4V 12g×2 Metal gear with 600mm lead with protection function (Rear wheel cover plate ×2 forward)
Recommended Battery 2S,7.4V,2200～5200mAh×2,LiPo with XT60 type plug(required & not included)
Ailerons Yes
Flaps Yes
Elevator Yes
Rudder(Vertical tail) Yes
The smoke system Included
Speed brake Yes (HAWK-NO Speed brake)
LED lights system Yes
Electromagnetic brake system Yes
Leading edge flap Yes (HAWK-NO Leading edge flaps)
Reinforced gyro Selective configuration (not included)
Packaging / Size Packing Box + Outer Box(Card mark)/55.9×19.7×16.5(inch)
CG (Center of Gravity) 161 mm from the leading edge of the Main Wing
Landing Gears Metal electric retractable hydraulic landing gear×3(Nose gear double wheel)
Battery Charger LiPo battery charger (required & not included)



PACKAGE INCLUDES:

  • Fuselage×1 pcs
  • Left main wing×1 pcs
  • Right main wing×1 pcs
  • Nose×1 pcs
  • Cockpit×1 pcs
  • Vertical tail×1 pcs
  • L&R Horizontal tail×1 pcs
  • Main wing carbon tube L=730mm external diameter 15.6mm×1 pcs
  • Accessories Bag 1 ×1 pcs
    • Screw (HM3×10mm)×10 pcs (Wing/Horizontal tail/Vertical tail)
    • Screw (HM4×50mm)×4 pcs (Nose)
  • Accessories Bag 2 ×1 pcs
    • 100mm signal line(JR male+JR male) ×8 pcs
  • Accessories Bag 3 ×1 pcs
    • Filler tube ×1 pcs
    • Left and right pitot tubes ×2 pcs
    • Nose radar antenna ×1 pcs
    • Upper and lower fuselage antenna ×2 pcs
    • Remove the ribbon before flight ×1 pcs
    • Oil tank overflow vent plug ×1 pcs
  • Manual×1 pcs


REQUIRES:

  • 8KG turbine engine (required & not included)
  • 9 channel radio system(radio & receiver) (required & not included)
  • 2S,7.4V,2200～5200mAh×2,LiPo with XT60 type plug(required & not included)
  • LiPo battery charger (required & not included)